| Quick facts | Answer |
|---|---|
| Cost range | $800 to $2,000+ per side; $60 to $150+ per hour labor |
| Time | One panel can take 8+ hours; bed swaps 3 to 5 hours |
| Who's qualified | Oklahoma licenses welders through its state Welder Program; ask the pro for proof of license and insurance. |
What can a handy Tulsa owner do themselves?
If you already own a welder and have done spot welds before, cutting out a small rust spot and welding in a patch panel is a realistic DIY job. Weld-in bed floor rust repair panels cost about $67.99 to $81.99 for parts alone, so materials are cheap. The hard parts are clean spot welds, grinding them flush, and keeping the panel from warping.
When to call a pro for truck bed repair welding in Tulsa
Call a pro when rust has perforated the bed floor, when damage reaches structural supports or bed mounts, or when broken paint means the job needs cutting, welding, filling, priming, and painting. A single panel can take 8 or more hours, and shop labor runs $800 to $2,000+ per side. Extensive damage usually needs professional body and welding work.
How much does truck bed repair welding cost in Tulsa?
One repair guide estimates shop labor for welded panel installation at $800 to $2,000+ per side, with labor rates of $60 to $150+ per hour. Small-dent mobile repairs run $150 to $250, $250 to $450, or $450 to $900, but broken paint pushes the job into much higher body-shop pricing. Weld-in patch panels themselves cost about $67.99 to $81.99.
How long does a truck bed welding repair take?
A single welded panel can take 8 or more hours of work, so extensive truck bed welding easily becomes an all-day project. Removing or installing a whole bed or box can take 3 to 5 hours in one example, making it a same-day job when conditions are straightforward. Weather can add delays, so schedule outdoor work around rain and wind.
Is welding regulated in Oklahoma?
Oklahoma issues and renews licenses for welders, welding inspectors, and weld test facilities through its state Welder Program, so welding can fall under state licensing rules. Oklahoma has no general license to start or own a business, but specific trades may require licenses, permits, or special registrations. Ask any pro for proof of license and insurance before work starts.
What to do next
- Inspect the bed floor and push on rusted spots to see if metal is perforated or just surface rust.
- Price weld-in patch panels (about $67.99 to $81.99 each) and compare against the $800 to $2,000+ per side shop-labor benchmark.
- Check the Oklahoma Welder Program license list on Oklahoma.gov before hiring, and ask the pro for proof of insurance.
- Get a written quote that states whether cutting, welding, filling, priming, and painting are included, since broken paint raises the price.
- Call (918) 303-0746 or email [email protected] for a free quote from an independent, insured mobile welder.
Tulsa Weld Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
