| Quick facts | Answer |
|---|---|
| Cost range | Repairs vary by damage; new 8x12 H-20 guards run $1,600-$2,800 materials |
| Time | Full installs take about two days plus concrete cure time |
| Who's qualified | Oklahoma-certified welder who passed a state-administered weld test |
What does cattle guard repair cost in Tulsa?
Repair pricing depends on the damage, so get an on-site estimate. For comparison, a bare 8-by-12-foot H-20 steel cattle guard runs roughly $1,600 to $2,800 materials-only, and a full installed guard commonly runs $3,500 to $8,000. Width, load rating, digging conditions, and drainage drive the price.
How long does a cattle guard job take?
A full install is usually a dirt-and-concrete job that takes about two days plus concrete cure time. Concrete needs about 7 days before heavy traffic and reaches full design strength near 28 days. Simple repairs on an existing guard are typically faster.
Why do cattle guards fail in Tulsa weather?
Cattle guards can fail when mud, gravel, or blowing snow packs the pit and forms a bridge, so the pit must stay clear. Tulsa's frost-free season averages 218 days, with the last 32°F freeze around March 29 and the first fall freeze around November 3. Plan maintenance and repairs inside that window.
Do you need a permit for welding in Tulsa?
Tulsa's fire prevention code requires an operational permit for cutting and welding work done under special circumstances, and the city fee is $135.00. Ask the pro whether your repair falls under that rule. Factor the fee into your quote if it applies.
Is the welder qualified for cattle guard repair?
Oklahoma licenses welders through its Welder Licensing Program. To be certified, a welder must pass a weld test administered by a state-certified weld test inspector at a state-certified weld test facility. Ask the pro for proof of license and insurance before work starts.
What to do next
- Photograph the damaged rails, the pit, and any mud or gravel bridging so the pro can quote the repair accurately.
- Ask the pro for proof of an Oklahoma welder certification issued through the state's Welder Licensing Program and current insurance.
- Request a free on-site estimate covering repair versus replacement, since a new 8x12 H-20 guard runs $1,600 to $2,800 materials-only.
- Ask whether your job needs Tulsa's $135.00 cutting and welding operational permit under the fire prevention code.
- Call (918) 303-0746 or email [email protected] for a free quote from an independent, insured mobile welder.
Tulsa Weld Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
