Sapulpa, OK

Metal Sign Post Repair in Sapulpa, OK

Short answer

Metal sign post repair in Sapulpa usually costs $150-$400 from a mobile welder, plus a possible $25-$100 travel fee. Tulsa Weld Guy at (918) 303-0746 refers you to an independent, insured mobile welder for free.

Updated November 12, 2026 2 min readLeer en español

Quick answer

Tulsa Weld Guy is a free referral service for mobile welding in Tulsa, OK: call or text (918) 303-0746 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; hourly welding rate: typically $90–$150 per hour; serving Tulsa, Broken Arrow, Owasso, Jenks, Bixby, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $150-$400 typical; small repairs may carry a $100-$200 minimum
Time Usually a short job - cut out damage and weld in fresh metal
Who's qualified Oklahoma's Welder Program licenses welders; ask the pro for proof of licence and insurance

Sapulpa, OK: what's different here

Sapulpa sits about 14 miles southwest of Tulsa, roughly a 16-minute drive by main highway, and is in Creek County. Its planning area covers 22.57 square miles of incorporated land. Many homes are detached, single-family houses on generous lots, so driveway and mailbox posts are common repair jobs. Summers are long and hot, with rains that often come as short, intense thunderstorms.

How does mobile metal sign post repair work in Sapulpa?

A mobile welder comes to your property and repairs the post on site. The common method is cutting out the damaged section and welding in fresh metal. That often saves you from buying and setting a whole new post.

What does metal sign post repair cost in Sapulpa?

General welding projects run about $250-$900 on average, with small repairs often carrying a $100-$200 minimum service charge. Sign and mailbox post repairs specifically are commonly priced at $150-$400. Mobile welding may add a $25-$100 travel fee.

Who can weld a sign post in Oklahoma?

Oklahoma's Welder Program issues licenses for welders, weld inspectors, and weld test facilities. Licensing rules are listed under OAC 380:20. You can verify a welder's license through the state program before hiring.

When is the best season for sign post welding work?

Sapulpa has moderate winters, so outdoor welding is possible much of the year. The frost-free season in the Tulsa area averages 218 days, with the first freeze typically between November 1 and November 10. Summer thunderstorms with intense rainfall may cause short delays.

What to do next

  1. Measure the damaged post and note whether the break is at the base or mid-post, since repairs are done by cutting out the bad section.
  2. Get a written quote listing the repair price, any $25-$100 travel fee, and the $100-$200 minimum if it applies.
  3. Check the welder's license through Oklahoma's Welder Program licensing page before you book.
  4. Ask for proof of insurance from the independent mobile welder before work starts.
  5. Call (918) 303-0746 or email [email protected] for a free quote from an independent, insured mobile welder.

Tulsa Weld Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Does a metal sign post usually need full replacement?

No. A mobile welder can often repair it by cutting out the damaged section and welding in fresh metal, if the base or section is fixable.

Do mobile welders charge extra to drive to Sapulpa?

Mobile welding services often add a travel fee of $25-$100. Sapulpa is about 14 miles from Tulsa, roughly a 16-minute drive.

Is there a minimum charge for a small weld repair?

Small repairs often carry a minimum service charge of $100-$200, according to Angi. Ask the pro what applies to your job.

Where can I check a welder's credentials in Oklahoma?

Oklahoma's Welder Program licenses welders, weld inspectors, and weld test facilities under rules at OAC 380:20. Ask the pro for proof of licence and insurance as well.

Tulsa Weld Guy is a free referral service connecting you with licensed, insured local mobile welders. We do not perform work or hold licenses. The pro you hire performs the work and may pay us a referral fee. You pay the pro only.

Want a real number for your home?

Send the form or call (918) 303-0746. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free mobile welding referral

Two minutes. A local welder calls you back.

We only share this with the mobile welder we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Weld Guy and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.